Manuals for Keurig K-Mini K15 Coffee Maker

The Keurig K-Mini K15 is a compact single-serve coffee maker designed for small spaces, featuring one-cup brewing, multi-voltage capability, removable drip tray, simple button operation, energy saving auto-off, and compatibility with all K-Cup pods. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Compact design, single-serve brewing, removable 6-ounce reservoir, multi-voltage capability, energy saving mode.

Installation

Unpack and inspect contents. Place on clean, stable surface.

1. Remove all packaging materials and stickers
2. Wash removable water reservoir with warm soapy water
3. Place coffee maker on flat, stable surface away from edges
4. Plug into appropriate power outlet
5. Fill reservoir with fresh cold water

WARNING! Keep away from water sources. Do not immerse in water. Ensure stable placement.

First-Time Setup

Prime the brewing system before first use.

1. Fill water reservoir with fresh cold water
2. Place mug on drip tray
3. Lift and close handle without K-Cup pod
4. Press brew button to run water through system
5. Repeat process 2-3 times to prime system
6. Discard water from initial priming cycles

CAUTION! Use only cold, fresh water. Do not use distilled or sparkling water.

Specifications

• Dimensions: 4.5" W x 12.1" H x 11.3" D
• Weight: 4.5 lbs
• Power: Multi-voltage (120V/240V)
• Brew Sizes: 6, 8, 10, 12 oz
• Water Reservoir: Removable 6-ounce capacity
• Auto Off: 90 seconds after brew
• Brew Time: Under 2 minutes
• Pod Compatibility: All K-Cup pods
• Warranty: 1-year limited
• Colors: Black, White, Red

Controls and Settings

Simple one-button operation with LED indicator.

Brew Button: Press to start brewing cycle. LED illuminates during brewing.

Handle: Lift to insert K-Cup pod, close to lock in place.

Drip Tray: Removable for cleaning and accommodating tall mugs.

Water Reservoir: Removable for easy filling and cleaning.

Power Indicator: LED shows when unit is powered on.

Brewing Process

Simple steps for perfect coffee every time.

1. Lift handle to open K-Cup pod chamber
2. Insert desired K-Cup pod
3. Close handle firmly until it clicks
4. Place mug on drip tray
5. Press brew button to start cycle
6. Wait for brewing to complete (under 2 minutes)
7. Remove mug and enjoy

Tip: For stronger coffee, use smaller cup size setting.

Maintenance & Cleaning

Regular cleaning ensures optimal performance.

1. Unplug unit and allow to cool completely
2. Remove and wash water reservoir with warm soapy water
3. Wipe exterior with damp cloth
4. Clean drip tray and mug stand regularly
5. Descale every 3-6 months depending on water hardness

CAUTION! Never immerse coffee maker in water. Unplug before cleaning.

Descaling Procedure

Remove mineral buildup for optimal performance.

1. Purchase Keurig descaling solution or white vinegar
2. Fill reservoir with descaling solution or equal parts vinegar and water
3. Run multiple brew cycles without K-Cup pod
4. Discard water from each cycle
5. Rinse thoroughly by running multiple cycles with fresh water
6. Repeat rinse until vinegar smell is gone

WARNING! Follow descaling instructions carefully. Rinse thoroughly.

Regulatory Information

UL listed for safety. Complies with FCC Part 15. Energy Star certified. Copyright © 2023 Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-866-901-2739.

Troubleshooting

Reset: Unplug for 2 minutes to reset system.

Service: 1-866-901-2739; www.keurig.com