Mr Coffee Keurig BVMc-KG5-001 Manual

The Mr Coffee Keurig BVMc-KG5-001 is a single-serve coffee brewing system compatible with K-Cup pods, featuring programmable settings, auto-off function, removable drip tray, and descaling alert. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Water reservoir, K-Cup pod holder, drip tray, power button, brew size selector, descaling indicator.

Installation

Unpack and inspect contents. Place on stable, level surface.

1. Remove all packaging materials and stickers
2. Wash removable parts: reservoir and drip tray with warm water
3. Fill water reservoir with fresh cold water
4. Plug into 120V AC power outlet
5. Prime the system by running water through without pod

WARNING! Do not use without water in reservoir. Keep away from children.

First-Time Setup

Power on brewer; follow initial setup procedure.

1. Fill reservoir: Remove and fill with cold water to MAX line
2. Prime system: Place mug, press brew button without K-Cup pod
3. Select brew size: Choose preferred cup size (6oz, 8oz, 10oz)
4. Set auto-off: Default 2-hour auto shut-off
5. Brew first cup: Insert K-Cup pod and brew

CAUTION! First few brews may contain manufacturing residues.

Specifications

• Model: BVMc-KG5-001
• Water Reservoir: 48 oz removable tank
• Brew Sizes: 6oz, 8oz, 10oz
• Power: 120V AC, 60Hz, 1470W
• Dimensions: 13.2" H x 9.8" W x 13.2" D
• Weight: 8.6 lbs
• Cord Length: 30 inches
• Compatibility: All K-Cup pods
• Warranty: 1 year limited

Controls and Settings

Front panel controls: Power, Brew, Brew Size Selector, Strength Control, Hot Water.

Indicator Lights: Power On, Heating, Ready to Brew, Descaling Alert.

Brew Settings: Select cup size (6oz, 8oz, 10oz). Strength Control: Regular or Strong brew setting. Auto-Off: Programmable 2-hour automatic shut-off. Hot Water Function: Dispense hot water without coffee pod.

Brewing Process

Step-by-step brewing instructions:

1. Lift handle to open K-Cup pod chamber
2. Insert K-Cup pod (any variety)
3. Close handle firmly until it clicks
4. Place mug on drip tray
5. Select desired brew size
6. Press BREW button
7. Brewing completes automatically
8. Remove mug and enjoy

Tip: Preheat mug with hot water function for hotter coffee.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

1. Daily: Wipe exterior with damp cloth
2. Weekly: Clean water reservoir and drip tray
3. Monthly: Descale according to procedure
4. As needed: Clean needle that pierces K-Cup pods

WARNING! Unplug before cleaning. Never immerse in water.

Descaling Procedure

Descale every 3-6 months or when indicator lights.

1. Mix descaling solution with water in reservoir
2. Place large container on drip tray
3. Press and hold 8oz and 10oz buttons for 3 seconds
4. Press brew button to start descaling cycle
5. Repeat with fresh water to rinse system
6. Run 2-3 cycles with clean water to remove residue

CAUTION! Use only Keurig descaling solution or vinegar solution.

Care Instructions

Unplug before cleaning. Use mild detergent only; no abrasive cleaners.

CAUTION! Do not use harsh chemicals; keep electrical components dry.

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device compliance. Copyright © 2025 Mr Coffee; trademarks of Newell Brands. For support, visit www.mrcoffee.com or contact 1-800-672-6372.

Troubleshooting

Reset: Unplug for 2 minutes then restart.

Service: 1-800-672-6372; www.mrcoffee.com