Mr Coffee Keurig KG2 Manual

The Mr Coffee Keurig KG2 is a single-serve coffee brewing system compatible with K-Cup pods, featuring programmable settings, auto-off functionality, removable water reservoir, adjustable cup size options, descaling alert, and energy-saving mode. Designed for home use with 120V AC power. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brewing unit, Removable water reservoir, Drip tray, Power button, Programmable clock, Cup size selector, Auto-off timer.

Installation & Setup

Unpack and inspect all components. Place on clean, level surface.

1. Remove packaging materials and protective tape.
2. Wash removable water reservoir and drip tray with warm water.
3. Place drip tray in position and insert water reservoir.
4. Plug into grounded 120V AC outlet.
5. Prime machine by running water-only brew cycle.

WARNING! Ensure hands are dry when handling electrical components. Keep away from water sources.

First-Time Use

Power on machine; follow initial setup procedure.

1. Fill water reservoir with fresh cold water.
2. Insert K-Cup pod into holder and close lid securely.
3. Place mug on drip tray (minimum 5oz capacity).
4. Select desired cup size using selector button.
5. Press brew button to begin cycle.
6. Program auto-off time using settings menu.

CAUTION! Hot surfaces during and after brewing. Do not touch brewing components.

Specifications

• Dimensions: 13.5" H x 10.2" W x 13.5" D
• Water Capacity: 48oz removable reservoir
• Brew Sizes: 6oz, 8oz, 10oz programmable
• Power: 120V AC, 60Hz, 1470W
• Auto-off: Programmable 2-hour default
• Compatibility: All K-Cup pod varieties
• Weight: 8.5 lbs
• Warranty: 1-year limited

Controls and Settings

Front panel controls: Power button, Brew button, Cup size selector, Program button.

Display Indicators: Power light, Ready light, Descaling alert, Cup size indicators.

Settings: Programmable auto-off (0-4 hours), Cup size memory, Clock setting, Descaling mode access. Maintenance: Water filter replacement indicator, Cleaning cycle activation.

Brewing Process

Step-by-step brewing instructions for optimal coffee.

1. Ensure machine is powered on and ready light is illuminated.
2. Lift handle and insert K-Cup pod into holder.
3. Close handle firmly until it clicks into place.
4. Place mug on drip tray (center under spout).
5. Select desired cup size using selector button.
6. Press brew button - brewing begins immediately.
7. Wait for cycle to complete (approximately 1 minute).
8. Remove mug and enjoy.

Tip: Preheat mug with hot water for better temperature retention.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Wipe exterior with damp cloth, empty drip tray.
2. Weekly: Remove and wash water reservoir, clean drip tray.
3. Monthly: Run vinegar cleaning solution through brew cycle.
4. As needed: Descale when indicator light activates.

CAUTION! Unplug machine before cleaning. Never immerse in water.

Descaling Procedure

Required when descaling indicator light illuminates.

1. Mix descaling solution with water as directed.
2. Pour solution into empty water reservoir.
3. Place large container on drip tray (at least 48oz capacity).
4. Press and hold brew button for 5 seconds to enter descale mode.
5. Allow solution to run through complete cycle.
6. Rinse reservoir thoroughly and run 2-3 clear water cycles.
7. Reset descaling indicator by holding program button.

WARNING! Use only manufacturer-approved descaling solutions.

Regulatory Information

UL listed; complies with FCC Part 15. Copyright © 2025 Mr Coffee; trademarks of Newell Brands. For support, visit www.mrcoffee.com or contact 1-800-672-6372. This appliance is for household use only.

Troubleshooting

Reset: Unplug for 2 minutes then restart.

Service: 1-800-672-6372; www.mrcoffee.com