Old Keurig Manual

The Old Keurig is a classic single-serve coffee brewing system featuring a compact design, multiple cup size options, removable water reservoir, descaling function, and energy-saving auto-off feature. Compatible with K-Cup pods, this model offers quick brewing times, adjustable temperature settings, and easy maintenance. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: Brewing chamber, Water reservoir, Control panel, Drip tray, Power button, Cup size selector.

Feature	Description
Water reservoir	Removable 48oz capacity for easy filling
Brewing chamber	Accepts K-Cup pods for single-serve brewing
Control panel	Power, brew size selection, descale indicator
Cup size options	6oz, 8oz, 10oz brew sizes
Drip tray	Removable for cleaning; accommodates travel mugs
Power cord	Standard 120V AC connection
Auto-off	Energy saving feature turns off after 90 seconds
Descale function	Indicator light alerts when cleaning is needed
Brew button	Starts brewing process once powered on
Water filter	Optional charcoal filter for improved taste

Installation & Setup

Unpack and inspect all components. Place on clean, level surface.

1. Remove packaging materials: Take off all tape and protective covers.
2. Position brewer: Place on stable counter away from heat sources.
3. Install water reservoir: Snap into place at rear of unit.
4. Prime brewing system: Fill reservoir, run water through without pod.
5. Plug into power outlet: Use standard 120V AC outlet.

WARNING! Keep away from water sources; do not immerse in liquid. Ensure proper ventilation.

First-Time Use

Power on brewer; follow initial setup procedure.

1. Fill water reservoir: Remove and fill with fresh cold water.
2. Power on: Press POWER button; wait for ready indicator.
3. Select brew size: Choose desired cup size (6oz, 8oz, 10oz).
4. Insert K-Cup: Lift handle, place pod in chamber, close firmly.
5. Start brewing: Place cup on drip tray, press BREW button.
6. First brew: Discard first brewing cycle to clean system.

CAUTION! Hot surfaces during operation; keep hands clear of brewing area.

Specifications

• Dimensions: 13.3" H x 9.8" W x 13.0" D
• Water Capacity: 48oz removable reservoir
• Power Requirements: 120V AC, 60Hz, 1470W
• Brew Sizes: 6oz, 8oz, 10oz options
• Brew Time: Under 1 minute per cup
• Compatibility: K-Cup pods only
• Auto-off: 90 seconds after last use
• Weight: 7.5 lbs
• Warranty: 1 year limited

Controls and Settings

Control panel features: POWER button, Brew size selector, Descaling indicator.

Operation: POWER turns unit on/off. Brew size buttons select cup volume. Descale light indicates cleaning needed.

Settings: Brew temperature (adjustable via hidden menu), Auto-off timing, Water filter reminder. Access settings by holding buttons during power-up sequence.

Brewing Process

Step-by-step brewing instructions for optimal coffee.

1. Ensure brewer is powered on and ready light is illuminated.
2. Lift handle to open brewing chamber.
3. Insert K-Cup pod into chamber, ensuring proper seating.
4. Close handle firmly until it clicks into place.
5. Place cup or mug on drip tray (minimum 5oz capacity).
6. Select desired brew size using control buttons.
7. Press BREW button to start brewing cycle.
8. Wait for cycle to complete (approximately 45-60 seconds).
9. Remove cup carefully; hot liquid present.

Tip: Preheat mug with hot water for better temperature retention.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

1. Daily: Wipe exterior with damp cloth; empty drip tray.
2. Weekly: Remove and clean water reservoir; wipe brewing chamber.
3. Monthly: Run vinegar solution through brewing system.
4. As needed: Descale when indicator light activates.
5. Filter replacement: Change water filter every 2 months or 60 tank refills.

WARNING! Unplug before cleaning; never immerse in water.

Descaling Procedure

Descaling removes mineral buildup for optimal performance.

1. Prepare solution: Mix Keurig descaling solution with water or use white vinegar.
2. Fill reservoir: Pour descaling solution into empty water reservoir.
3. Start descale mode: Press and hold 6oz and 10oz buttons for 3 seconds.
4. Begin cycle: Place large container on drip tray, press BREW.
5. Repeat brewing: Continue until reservoir is empty.
6. Rinse system: Fill reservoir with fresh water, run multiple cycles.
7. Reset indicator: Descale light will turn off after completion.

CAUTION! Use only Keurig-approved descaling solutions.

Care Instructions

Unplug before cleaning. Use mild detergent and soft cloth only; no abrasive cleaners.

CAUTION! Do not use harsh chemicals; avoid getting water in electrical components. Store in dry location when not in use.

Regulatory Information

UL Listed: Certified for household use. FCC Part 15: Class B digital device compliance. Copyright © Keurig Incorporated. Energy Star compliant. For support, visit www.keurig.com or contact 1-866-901-2739. Manufactured under license from Keurig Green Mountain, Inc.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Check outlet; ensure power cord is firmly connected.
No water flow	Clogged needles/reservoir	Descale system; check water reservoir placement.
Small cup volume	Mineral buildup	Descale brewer; check brew size selection.
Leaking water	Loose connections	Ensure reservoir properly seated; check seals.
Poor coffee taste	Old pods/cleaning needed	Use fresh K-Cups; clean brewing chamber.
Descale light on	Mineral accumulation	Perform descaling procedure immediately.
Brewing too slow	Clogged water lines	Descale system; check water filter.

Reset: Unplug for 2 minutes, then restart.

Service: 1-866-901-2739; www.keurig.com