Oster Keurig Coffee Maker Manual

The Oster Keurig Coffee Maker is a single-serve brewing system designed for convenience and quality coffee preparation. This compact appliance features K-Cup pod compatibility, multiple cup size options, removable water reservoir, descaling function, programmable settings, auto-off feature, and energy-saving mode. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation & Setup 3. First-Time Use 4. Specifications 5. Controls and Settings 6. Brewing Process 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Brewing chamber, Water reservoir, Control panel, Drip tray, Power cord, K-Cup holder.

Feature	Description
Brewing chamber	For K-Cup pod insertion and brewing
Water reservoir	Removable 48oz capacity tank
Control panel	Touch buttons for cup size and power
Drip tray	Removable for easy cleaning
Power cord	Standard 3-prong plug
K-Cup holder	Compatible with all K-Cup pods
Cup size options	6oz, 8oz, 10oz brew sizes
Auto-off	Automatic shut-off after 2 hours
Descale indicator	LED light alerts when descaling needed
Energy saving	Low power consumption mode

Installation & Setup

Unpack and inspect all components. Place on clean, dry, stable surface.

Remove packaging materials: Take off all tape and protective covers.
Wash components: Clean water reservoir and drip tray with warm water.
Position machine: Ensure 4 inches clearance on all sides for ventilation.
Fill water reservoir: Add fresh cold water to maximum fill line.
Plug into outlet: Use grounded 120V AC outlet.

WARNING! Do not use abrasive cleaners. Keep away from heat sources and water splashes.

First-Time Use

Prime the machine before first brew to ensure optimal performance.

Power on: Press POWER button; wait for ready indicator.
Initial rinse: Place mug on drip tray, run brew cycle without K-Cup.
Select cup size: Choose desired brew size (6oz, 8oz, 10oz).
Insert K-Cup: Lift handle, place pod, close firmly.
Start brewing: Press brew button; machine will complete cycle automatically.

CAUTION! Water and coffee will be hot. Handle with care to avoid burns.

Specifications

Dimensions: 10.5" W x 13.2" H x 11.8" D
Water Capacity: 48 oz removable reservoir
Power: 120V AC, 60Hz, 1470W
Brew Sizes: 6oz, 8oz, 10oz
Brew Time: Approximately 1 minute per cup
Pod Compatibility: All Keurig K-Cup pods
Weight: 7.5 lbs
Material: BPA-free plastic components
Warranty: 1-year limited warranty

Controls and Settings

Control Panel: POWER button, Brew button, Cup size selection (6oz/8oz/10oz), Add Water indicator, Descaling indicator.

Operation: Power ON/OFF, Brew start/stop, Cup size selection, Auto-off programming.

Settings: Brew temperature control, Auto-off timing (2 hours default), Descaling mode activation, Water filter replacement indicator (if equipped).

Brewing Process

Step-by-step brewing instructions for perfect coffee every time.

Ensure machine is powered on and ready indicator is lit.
Lift brewing handle to open K-Cup chamber.
Insert K-Cup pod into holder, ensuring proper seating.
Close brewing handle firmly until it clicks.
Place mug on drip tray (minimum 5oz capacity).
Select desired cup size using size buttons.
Press BREW button to start brewing cycle.
Wait for cycle completion; machine will stop automatically.
Remove mug and enjoy your beverage.

Tip: For hotter coffee, run a water-only cycle first to preheat the system.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and extends machine lifespan.

Daily: Wipe exterior with damp cloth; empty drip tray.
Weekly: Remove and wash water reservoir; clean K-Cup holder.
Monthly: Descale machine using approved descaling solution.
As needed: Replace water filter (if equipped) every 2 months.

CAUTION! Unplug machine before cleaning. Never immerse in water.

Descaling Procedure

Descale every 3-6 months depending on water hardness.

Prepare descaling solution: Mix according to package instructions.
Fill reservoir: Pour solution into water reservoir.
Enter descale mode: Press and hold 6oz and 10oz buttons for 3 seconds.
Start cycle: Place large container on drip tray, press brew button.
Repeat: Continue brewing until reservoir is empty.
Rinse: Fill reservoir with fresh water, run 2-3 brew cycles.
Complete: Machine will return to normal operation mode.

WARNING! Use only Keurig-approved descaling solutions.

Regulatory Information

UL Listed: Certified for safety standards. FCC Part 15: Class B digital device compliance. Energy Star: Meets energy efficiency guidelines. Copyright © 2025 Oster; trademarks of Sunbeam Products, Inc. For support, visit www.oster.com or contact 1-800-334-0759.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Machine won't power on	Power connection	Check outlet; ensure power cord is firmly plugged in.
No water flow	Clogged needle/air lock	Descale machine; check for pod debris in needle.
Coffee not hot enough	Temperature setting	Preheat with water cycle; check brew temperature setting.
Leaking water	Loose connections	Ensure reservoir is properly seated; check seal integrity.
Error lights flashing	Various issues	Unplug for 2 minutes, then restart; check water level.

Reset: Unplug for 2 minutes to reset electronic controls.

Service: 1-800-334-0759; www.oster.com