Owners Manual for Keurig Bolt Z6000

The Keurig Bolt Z6000 is a high-performance commercial coffee brewing system designed for office and commercial use. It features rapid brewing technology, large water reservoir, programmable settings, descaling alerts, and compatibility with K-Cup pods. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Brewing Operations 7. Maintenance & Cleaning 8. Descaling Procedure 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Commercial-grade brewing system, Large 2.5L water reservoir, Digital display, Programmable settings, Descaling alert system, K-Cup pod compatibility.

Feature	Description
Brewing System	High-pressure commercial brewing technology
Water Reservoir	2.5L capacity with easy-fill design
Digital Display	LCD screen with brewing status and alerts
Brew Sizes	6oz, 8oz, 10oz programmable options
Power Requirements	120V AC, 60Hz
Brew Time	Under 60 seconds per cup
Descaling Alert	Automatic notification when descaling required
Drip Tray	Removable and dishwasher safe
Energy Saver	Auto-off after 2 hours of inactivity
Water Filter	Replaceable water filter system

Installation

Unpack and inspect contents. Place on stable, level surface.

Remove all packaging materials and tape from unit.
Place brewer on clean, dry, stable countertop away from heat sources.
Fill water reservoir with fresh cold water.
Plug into grounded electrical outlet.
Prime the brewing system by running water through without a pod.

WARNING! Ensure unit is on stable surface to prevent tipping. Use only grounded electrical outlet.

First-Time Setup

Power on brewer; follow initial setup procedure.

Prime the system: Press power button, place mug on drip tray, press brew button without K-Cup.
Set brew size: Use programming mode to set preferred brew sizes (6oz, 8oz, 10oz).
Set auto-off: Configure energy saver auto-off timing (30 min, 1 hour, 2 hours).
Install water filter: Insert compatible Keurig water filter into reservoir.

CAUTION! Do not operate without water in reservoir. Always use fresh cold water.

Specifications

Dimensions: 13.5" H x 10.2" W x 15.8" D
Water Reservoir: 2.5 liters capacity
Power: 120V AC, 60Hz, 1500W
Brew Sizes: 6oz, 8oz, 10oz programmable
Brew Time: Under 60 seconds
Pod Compatibility: All K-Cup pod varieties
Weight: 12.5 lbs
Warranty: 1-year commercial limited warranty
Operating Temp: 40°F to 95°F (4°C to 35°C)

Controls and Settings

Access controls via front panel buttons and digital display.

Front Panel: POWER, BREW, PROGRAM, DESCALE ALERT, BREW SIZE SELECTION

Settings: Brew size programming (6oz, 8oz, 10oz), Auto-off timing (30min, 1hr, 2hr), Temperature control (hot, hotter), Descaling mode, Factory reset.

Display Indicators: Power on, Heating, Ready to brew, Descaling alert, Add water, Brew in progress.

Brewing Operations

Daily brewing procedure for optimal performance.

Ensure water reservoir is filled with fresh cold water.
Power on unit - wait for READY indicator.
Lift handle and insert K-Cup pod.
Close handle firmly.
Place mug on drip tray.
Select brew size and press BREW button.
Brewing completes automatically.
Remove mug and enjoy.

Tip: Always use approved K-Cup pods. Do not use ground coffee or other pod types.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Daily: Wipe exterior with damp cloth.
Weekly: Clean drip tray and removable parts.
Monthly: Run vinegar solution through brewing system.
As needed: Replace water filter every 2 months or 60 tank refills.
Descale: When DESCALE alert appears on display.

CAUTION! Unplug unit before cleaning. Do not immerse in water.

Descaling Procedure

Descale when alert appears or every 3-6 months.

Prepare descaling solution: Use Keurig descaling solution or white vinegar.
Fill reservoir with descaling solution and water (50/50 mix).
Enter descaling mode: Press and hold PROGRAM + BREW for 3 seconds.
Run solution through brewing system until reservoir is empty.
Rinse: Fill reservoir with fresh water and run through system 2-3 times.
Reset descale alert: Press and hold PROGRAM for 5 seconds.

WARNING! Use only approved descaling solutions. Rinse thoroughly after descaling.

Regulatory Information

UL Listed: Complies with UL STD 197. FCC Part 15: Class B digital device. Energy Star compliant. Copyright © 2025 Keurig Green Mountain, Inc. All rights reserved. For support, visit www.keurig.com or contact 1-800-KEURIG-5.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Brewer won't power on	Power connection	Check power cord connection; ensure outlet is working
No water flow	Empty reservoir/clog	Fill water reservoir; check for clogs in needle
Weak coffee	Water temperature/pod	Ensure proper heating; use fresh K-Cup pod
Descale alert on	Mineral buildup	Perform descaling procedure
Leaking water	Seals/reservoir	Check reservoir seating; inspect seals for damage

Reset: Unplug for 2 minutes then restart.

Service: 1-800-KEURIG-5; www.keurig.com